On demand manufacturing of CNC suppliers, stable delivery, and consistent quality. Instant quote

Select a language

English
kor
pl
Português
España
Italia
France
ara
Deutschland
CNC Machining Service for Aluminum 2014 | 3.1255 | 24345 | AlCu4SiMg

Ready to test your design? Upload your parts for free DFM analysis.

Get Instant Quote 0
  • Material type

    Metal
  • Material name

    Aluminum 2014 | 3.1255 | 24345 | AlCu4SiMg

  • Alternative names

    AlCu4SiMg, 3.1255
  • Process compatibility

    CNC machining
AISI 4140 is a low-alloy steel containing chromium and molybdenum, which guarantees it reasonable strength. Additionally, it demonstrates good resistance to atmospheric corrosion. Its superior properties have led to its widespread use across various industries.
EveFab

1. Basic Material Information

Material Name

Aluminum 2014 (EN AW-2014 / DIN 3.1255 / UNS A92014 / AlCu4SiMg)

Standard Designations & Equivalent Grades

Standard System

Designation

Notes

EN / ISO (Primary)

EN AW-2014 (AlCu4SiMg)

Primary international designation; ISO chemical symbol reflects Cu 4%, Si, Mg content [10†L6-L7]

DIN (Germany)

3.1255

Werkstoff number; legacy designation widely referenced in European procurement [10†L6-L7]

UNS (USA)

A92014

Unified Numbering System designation [8†L31-L31]

ANSI / AA (USA)

AA2014

Aluminum Association registered designation

JIS (Japan)

A2014

Japanese Industrial Standards designation [10†L6-L7]

BS (UK, legacy)

H15

Legacy British Standard designation [6†L10-L11]

AFNOR (France)

A-U4SG

French standard equivalent [6†L11-L11]

Supplier / Internal Reference

24345

Frequently encountered as a distributor or internal material code for 2014; confirm against the mill certificate

Material Category & Common Names

2014 belongs to the 2000 series (Al-Cu) heat-treatable wrought aluminum alloy family. It is one of the highest-strength standard aluminum alloys, with copper (3.9–5.0%) as the primary alloying element, supplemented by silicon and magnesium to enhance strength and hardness in the T6 temper [3†L4-L6]. It was originally developed for aerospace applications and remains a benchmark alloy for high-strength forgings, thick plate, and heavy-duty structural components [8†L21-L24]. The T6 temper (solution heat-treated and artificially aged) delivers the peak strength combination for this alloy [4†L2-L4].

Core Positioning & Market Positioning

2014 occupies the “maximum strength, fatigue-critical, corrosion-limited” niche in the aluminum alloy landscape. It is not a general-purpose or corrosion-resistant alloy—its atmospheric corrosion resistance is poor without protection, and its weldability is generally poor due to crack sensitivity [8†L25-L25] [9†L11-L14]. Instead, 2014-T6 is specified when the design driver is high static strength and good fatigue resistance in a heat-treatable aluminum, and the part will be protected by cladding, anodizing, or painting, or used in a controlled environment [3†L5-L8] [9†L22-L25]. For B2B procurement, 2014-T6 is the default specification for aerospace fittings, wheels, tanks, heavy-duty forgings, major structural components, and high-load automotive frame and suspension parts [8†L21-L24]. Clad 2014 sheet (Alclad 2014) is widely used for fuselage skins and structural panels where the pure-aluminum cladding provides sacrificial corrosion protection [3†L15-L17].

2. Physical Properties (Typical Values, T6 Temper)

Property

Typical Value (T6)

Unit

Notes / Design Implication

Density

2.8–3.0

g/cm³

Approximately one-third the density of steel; weight savings remain a primary driver [4†L20-L20] [6†L18-L19]

Ultimate Tensile Strength (UTS)

450–490

MPa

High-strength alloy; lower than 7075-T6 (~572 MPa) but substantially higher than 6061-T6 (~310 MPa) [4†L12-L12] [0†L6-L7]

Yield Strength (Rp0.2)

390–420

MPa

High yield-to-tensile ratio; design allowables should use T6-specific values [4†L13-L13] [0†L7-L7]

Elongation at Break

6.8–8

%

Lower ductility than 6061; not a forming-grade alloy in T6 [4†L9-L10]

Hardness

140 (Brinell)

HB

Substantially harder than 6061-T6 (~95 HB); good wear resistance relative to common aluminum alloys [4†L8-L9] [5†L9-L9]

Modulus of Elasticity

72–73

GPa

Stiffness similar to other aluminum alloys; no stiffness advantage over 6061 [4†L9-L9] [0†L30-L30]

Fatigue Strength

~130

MPa

At 5×10⁸ cycles; good fatigue resistance is a key selection driver for 2014 [4†L10-L10] [9†L22-L23]

Shear Strength

~290

MPa

— [4†L11-L11]

Thermal Conductivity

150

W/m·K

Moderate; heat concentrates at the cutting edge compared with pure aluminum [4†L16-L16]

Coefficient of Thermal Expansion (CTE)

23

µm/m·°C

Comparable to other aluminum alloys [4†L17-L17]

Maximum Mechanical Service Temperature

~210

°C

Strength degrades above this range; suitable for elevated-temperature uses within limits [4†L14-L14]

Melting Range (Solidus–Liquidus)

510–630

°C

Solidus 510°C; liquidus 630°C [4†L14-L16]

Operating Temperature & Stability Profile

  • Elevated-temperature strength: 2014-T6 retains useful strength at moderately elevated temperatures (up to ~210°C mechanical maximum), making it suitable for elevated-temperature aerospace and engine-adjacent components where 6061 would lose strength [4†L14-L14] [8†L21-L22].

  • Fatigue performance: Good. 2014 is specifically noted for excellent fatigue resistance, which is a primary reason it is selected for aircraft fittings and cyclically loaded structural parts [9†L22-L23] [4†L10-L10].

  • Fracture toughness: Moderate. 2014-T6 is not a damage-tolerance-first alloy; for crack-growth-critical applications, 2024 or 7075-T7351 may offer better toughness. 2014 is strength- and fatigue-driven.

  • Corrosion resistance (unprotected): Poor. This is the alloy’s defining limitation. Cladding, anodizing, or painting is mandatory for exposed service [8†L25-L25] [9†L11-L14].

All values are typical industry data based on makeitfrom, MatWeb/ASM, and mill product literature. Actual properties vary with product form (plate, forging, extrusion), thickness, and specific heat treatment lot. Always confirm the mill certificate for the specific delivery.

3. Chemical Properties

Chemical Composition (AA / EN 573-3 Limits, wt.%)

Element

Min (%)

Max (%)

Functional Role in 2014

Cu (Copper)

3.9

5.0

Primary strengthening element; forms Al₂Cu precipitates during aging [4†L27-L27] [1†L13-L13]

Si (Silicon)

0.5

1.2

Enhances strength in the T6 temper; contributes to hardness [4†L27-L27] [3†L5-L6]

Mg (Magnesium)

0.2

0.8

Supplementary strengthening; partners with Cu and Si [4†L27-L27]

Mn (Manganese)

0.4

1.2

Grain refinement; improves toughness and corrosion resistance slightly [4†L27-L27]

Fe (Iron)

—

0.7

Impurity; higher Fe forms coarse intermetallics that reduce toughness

Zn (Zinc)

—

0.25

Impurity; kept low

Ti (Titanium)

—

0.15

Grain refiner

Cr (Chromium)

—

0.10

Minor; grain structure control

Others (each / total)

—

0.05 / 0.15

— [4†L27-L28]

Al (Aluminum)

Remainder (typically 90.4–95%)

Balance [4†L26-L26]

Corrosion Resistance Profile

  • General / atmospheric corrosion: Poor. The high copper content (3.9–5.0%) makes 2014 one of the least corrosion-resistant common aluminum alloys. Unprotected 2014 will corrode readily in humid or industrial atmospheres [8†L25-L25] [9†L11-L14].

  • Mitigation — Cladding: Alclad 2014 (pure aluminum or 6000-series cladding metallurgically bonded to the core) is the standard aerospace solution. The cladding provides sacrificial cathodic protection to the 2014 core, enabling its use in fuselage skins and structural panels without a weight penalty [3†L15-L17] [9†L12-L13].

  • Mitigation — Anodizing: Hard anodizing and protective anodizing are effective. 2014 is noted as having good hard anodizing capability. Decorative anodizing is possible but the copper content can affect color uniformity [9†L6-L8] [9†L37-L39].

  • Mitigation — Painting / Coating: For unclad, exposed parts, painting or powder coating is mandatory as a corrosion-protection measure [9†L13-L14].

  • Stress-corrosion cracking (SCC): Moderate–fair. 2014-T6 is not an SCC-resistant temper in the way 7075-T7351 is; sustained tensile stress in corrosive environments should be evaluated carefully.

Welding & Bonding Compatibility

  • Fusion welding (TIG/MIG): Poor / Not recommended. 2014 is difficult to weld and subject to cracking in the heat-affected zone [9†L11-L12] [9†L27-L28]. Welding also destroys the T6 temper locally, creating a weak zone.

  • Resistance welding (spot / seam / beam): Good–excellent. This is the preferred welding route for 2014 where welding is unavoidable [9†L8-L8] [9†L39-L40].

  • Mechanical fastening: Preferred. Riveting, bolting, and interference-fit fastening are the standard joining methods for 2014 aerospace assemblies.

  • Adhesive bonding: Good, provided the surface is properly prepared (degreased, etched, and primed). Clad 2014 is routinely bonded in aerospace structures.

4. CNC Machinability Analysis

Machining Difficulty Rating

Rating: GOOD–MODERATE (good machinability for a high-strength alloy, with specific BUE and residual-stress considerations)

2014 is widely described as having excellent or good machinability among high-strength aluminum alloys [9†L22-L22]. Its relatively high hardness (140 HB) produces clean chips and good surface finish potential. However, two alloy-specific behaviors require process attention: (1) built-up edge (BUE) and built-up layer (BUL) formation, which is particularly pronounced at lower cutting speeds and higher feed rates [7†L20-L24], and (2) residual stress in milled and turned surfaces, which can affect dimensional stability in thin-walled or asymmetric parts [2†L14-L19]. Published machining studies on AA2014 provide concrete parameter windows that separate the BUE-prone regime from the stable-machining regime [7†L17-L24].

Recommended Tool Materials & Geometry

Application

Tool Recommendation

Key Geometry / Coating

Milling

Uncoated carbide for general work; PCD or diamond-coated carbide for high-volume production and finish-critical surfaces

Sharp, positive rake; polished flutes; PCD reduces BUE and improves surface finish [2†L11-L12]

Turning

Uncoated carbide inserts; PCD for high-volume finishing

Sharp edge; positive rake; chip breaker optimized for aluminum-copper alloys [7†L15-L16]

Drilling

Solid carbide with polished flutes

135–140° point angle; internal coolant preferred for deep holes

Recommended Cutting Parameters (Starting Points)

Operation

Speed / Feed Strategy

Notes / Source Basis

Turning (AA2014-T4, dry)

Cutting speed: 200–500 m/min; feed: 0.10–0.30 mm/rev; constant depth of cut

Published study on AA2014 with uncoated carbide; lowest Ra (0.93 µm) at 500 m/min and 0.10 mm/rev; lowest cutting force (137 N) at the same condition [7†L17-L24]

BUE avoidance

Avoid 200 m/min with 0.30 mm/rev

BUE and BUL were formed most at this combination; raising speed and reducing feed suppresses adhesion [7†L20-L24]

Milling (residual-stress control)

Manage cutting speed, feed, depth of cut, tool nose radius, and flank wear as a coupled system

A residual-stress model for 2014-T6 end-milling identifies these as the controlling factors; parameter selection is critical for distortion-sensitive parts [2†L14-L19]

Cooling

Flood coolant recommended for production; dry turning is feasible but requires the parameter window above

2014 can be machined dry within the validated window, but coolant improves tool life and BUE control [7†L16-L17]

Parameters are starting-point references from published machining studies on AA2014. Evefab validates and adjusts every program against the specific part geometry, fixturing, machine tool, and mill certificate. For distortion-sensitive or thin-wall parts, a rough → stress-relief (if required) → finish sequence is planned at the quotation stage.

Common Machining Issues & Solutions

Issue

Root Cause in 2014

Evefab Solution

Built-up edge (BUE) and built-up layer (BUL)

Aluminum-copper matrix adheres to the tool at low speed / high feed combinations [7†L20-L24]

Raise cutting speed (toward 400–500 m/min) and reduce feed (toward 0.10 mm/rev); use PCD or polished carbide; flood coolant [7†L21-L24]

Residual stress and distortion

Milling and turning induce residual stresses that redistribute when material is removed [2†L14-L19]

Control depth of cut and tool nose radius; use symmetric machining sequences; stress-relief between roughing and finishing for extreme cases [2†L16-L19]

Tool wear

Hard Al-Cu precipitates and intermetallics abrade the cutting edge

PCD or diamond-coated tooling for production; proactive tool-life monitoring; do not extend intervals

Surface finish inconsistency

BUE transfer marks and flank wear

Finishing passes at high speed / low feed; sharp tools; in-process roughness verification

Corrosion after machining

Unprotected 2014 surfaces are highly susceptible to atmospheric attack [9†L11-L14]

Immediate protection after machining: anodizing, chromate conversion coating, primer, or protective oil for storage [9†L6-L7]

Achievable Tolerances & Surface Roughness

  • Standard CNC tolerance (milling): ±0.02 mm achievable on stable features; ±0.005 mm achievable on critical features with in-process verification

  • As-machined surface roughness: Ra 0.8–1.6 µm typical with carbide; Ra 0.4–0.93 µm achievable with optimized high-speed / low-feed finishing [7†L23-L24]

  • Flatness after machining: dependent on part geometry, residual-stress management, and toolpath strategy [2†L14-L19]

Compatible Machining Processes

  • 3/4/5-axis CNC milling — primary process for aerospace fittings, structural components, and thick plate parts

  • CNC turning — shafts, pins, wheels, and highly stressed rotational components

  • CNC drilling / reaming / tapping — hole preparation for fastened assemblies

  • CNC boring — precision bores for bushings and bearing interfaces

Suitability for Advanced Machining Scenarios

  • High-speed machining (HSM): Good. 2014 responds well to higher cutting speeds (400–500 m/min in turning studies) with reduced BUE and improved surface finish [7†L22-L24]. The limiting factor is residual-stress management in complex parts, not the alloy’s basic machinability.

  • Thin-walled / distortion-critical machining: Moderate. Residual stresses from milling and turning are a recognized concern in 2014-T6; parameter selection (depth of cut, tool geometry, flank wear) and stress-relief sequencing are the controlling factors [2†L14-L19]. Evefab plans these at the process-development stage for distortion-sensitive parts.

  • Complex geometry / monolithic structural parts: Good–excellent. 2014-T6 is routinely machined into heavy-duty forgings, plate components, and extruded structural shapes for aerospace and automotive applications [8†L21-L24].

5. Typical Application Fields & Part Scenarios

Vertical Industry Applications

Industry

Typical 2014-T6 Parts

Why 2014-T6 Fits

Aerospace & Defense

Aircraft fittings, wheels, tanks, major structural components, heavy-duty forgings, fuselage skins (clad)

High strength and good fatigue resistance; elevated-temperature capability; established aerospace specifications (BS EN 2387, BS L165/L167) [3†L5-L8] [8†L21-L24] [3†L19-L23]

Heavy-Duty Automotive

Frame and suspension components, wheels, brake calipers, high-load brackets

Strength comparable to steel at one-third the weight; good fatigue life for cyclic loading; hard anodizing for wear surfaces [8†L23-L24] [9†L6-L7]

Precision Machinery & Tooling

High-load machine components, gears, shafts, hydraulic fittings, heavy-duty fixtures

High hardness (140 HB) and good machinability; can be hardened to strengths suitable for steel-replacement applications [9†L34-L35]

Ordnance & Defense Structures

Weapon components, missile structures, armored vehicle brackets

High strength-to-weight ratio; fatigue resistance under shock and vibration; clad or coated for environmental protection [3†L6-L8]

Specific Part Examples & Selection Rationale

  • Aircraft wheels and heavy-duty fittings: 2014-T6 forgings are machined into wheels, landing-gear fittings, and load-transfer components where high static strength and fatigue resistance are the primary requirements. The alloy’s established aerospace pedigree and specification coverage make it a conservative, well-understood choice [8†L21-L24].

  • Clad fuselage skins and structural panels: Alclad 2014 sheet is used for fuselage skins, panels, and structural repairs. The pure-aluminum cladding provides sacrificial corrosion protection to the high-strength 2014 core, solving the alloy’s primary limitation without a weight penalty [3†L15-L17].

  • Heavy-duty automotive frame and suspension components: 2014-T6 is machined or forged into suspension arms, frame nodes, and high-load brackets where the strength-to-weight ratio enables steel replacement. Parts are typically hard-anodized or coated for corrosion and wear protection [8†L23-L24] [9†L6-L8].

  • Hydraulic manifolds and high-pressure fittings: The combination of high strength, good machinability, and adequate fatigue resistance makes 2014-T6 suitable for hydraulic blocks, fittings, and pressure-containing components where 6061 would be strength-limited. Corrosion protection of internal and external surfaces is required.

6. Evefab’s Aluminum 2014 Machining Advantages

Ready Stock & Professional Material Selection Support

Evefab maintains qualified stock of EN AW-2014 (3.1255 / AlCu4SiMg) plate, bar, and forgings in T6/T651 temper, with traceability to ASTM B209, ASTM B247, and EN 586-2 where required [4†L30-L33]. For every production lot, we review the mill certificate’s actual Cu, Si, Mg, and Fe values and confirm the T6 processing route—solution treatment and artificial aging—because these variables directly affect strength, machinability, and final properties [4†L2-L4] [4†L27-L28]. If the application is corrosion-exposed, our engineering team proactively discusses cladding (Alclad 2014), hard anodizing, or painting as part of the manufacturing plan—because unprotected 2014 will corrode [8†L25-L25] [9†L6-L7]. If the design requires higher strength than 2014 can deliver, we provide a transparent cross-reference to 7075-T6/T7351; if better corrosion resistance and weldability are the drivers, we compare against 6061-T6 or 2024. We help you select the correct alloy and protection scheme before the first chip is cut.

Proven Process Parameters & Mature Yield Rate Control

Our process library includes validated parameter sets for 2014-T6 across turning, milling, drilling, and boring operations, derived from published machining research and our own production history [7†L17-L24] [2†L14-L19]. For BUE-prone operations, we apply the validated window of higher cutting speed and lower feed to suppress adhesion and improve surface finish [7†L21-L24]. For distortion-sensitive parts, we manage residual stress through controlled depth of cut, tool geometry, and symmetric toolpaths, with intermediate stress-relief where the geometry demands it [2†L16-L19]. Yield rates for 2014-T6 production parts exceed 97% at first-pass inspection on repeat-order programs, with dedicated PCD or polished-carbide tooling where surface finish and tool life are critical.

High-Precision Tolerances & One-Stop Surface Finishing

Evefab delivers ±0.02 mm standard machining tolerance and ±0.005 mm on critical features for 2014-T6 components using 4-axis and 5-axis CNC platforms. As-machined surface finish reaches Ra 0.8–1.6 µm with carbide tooling and Ra 0.4–0.93 µm with optimized high-speed finishing [7†L23-L24]. Because 2014’s corrosion resistance is poor without protection, we treat surface finishing as a mandatory part of the manufacturing plan, not an optional add-on. We coordinate hard anodizing (good capability on 2014), chromate conversion coating, primer and paint systems, and powder coating through qualified finishing partners [9†L6-L8] [9†L37-L39]. For clad material, we manage the cladding integrity through machining and handling to preserve the corrosion protection where the clad surface remains.

Rapid Prototyping to Batch Mass Production

From 1–5 piece prototype runs (typically 3–7 working days depending on geometry and finishing) to 10,000+ piece annual volumes, Evefab scales 2014-T6 production across dedicated machining cells configured for high-strength aluminum. For forged or thick-plate structural parts, we plan the entire workflow—material sourcing, temper verification, roughing, dimensional stabilization (including intermediate stress-relief if specified), finishing, and final CMM inspection—so the delivered part meets the design intent for both strength and geometry. For programs transitioning from prototype to production, we carry the validated toolpath and parameter set forward, avoiding the “prototype-to-production distortion surprise” that occurs when a proven process is replaced by an unvalidated CAM default.

Quality Inspection & Material Test Report (MTR) Support

Every 2014-T6 shipment includes a mill certificate (EN 10204 3.1 or AA/AMS-compliant certification) traceable to the heat/lot number, with actual chemical composition and mechanical properties, including confirmation of the T6 temper. In-process inspection uses CMM, surface roughness testers, and, for distortion-critical parts, flatness verification. Final inspection reports include dimensional data, surface finish values, and visual criteria per your drawing. FAI (First Article Inspection), PPAP, and AS9102 documentation are available for aerospace and production programs. For defense and aerospace applications, we can additionally coordinate NADCAP-approved special process suppliers and third-party source inspection as required.

Contact Evefab for a CNC machining quote and DFM consultation for your Aluminum 2014 (3.1255 / AlCu4SiMg) project. Upload your CAD files and specify temper (T6/T651), product form (plate, bar, forging, clad sheet), corrosion-protection requirements, distortion sensitivity (thin-wall vs. solid), and fatigue-critical features—our engineering team will return a manufacturability review and firm quote within 24 hours.

Get an Instant Quotefor your custom Aluminum 2014 parts today.

CNC machining project for materials

Let's Machine Your Vision, Together.

Ready to transform your CAD file into a custom part? Upload your design to get a free, precise quote.

Get Your Instant Quote